Bathroom Tap Types You Need To Know Before Buying

You should be able to distinguish between the different types of bathroom taps if you're thinking about replacing them in your bathroom.

You will find, for example, that taps designed for baths are different in size from those for basins. This is why it is important to ensure you understand what you're purchasing. Sometimes, tap holes are already drilled in bathtubs or sinks, but not always. You need to fully understand what you are buying and ensure that the taps fit.

This article will cover the most popular bathroom taps available so you can make an informed decision about the right bathroom tap for you.

Types of basin tap and bath tap

1. Mixer taps

Mixer taps can be identified by their separate cold and hot valves, but one spout. These taps are often connected to shower-over-bath setups, as well as basins and the kitchen. Turn on both taps to achieve the desired temperature and then mix the water.

2. Monobloc taps

These taps are becoming more popular in bathrooms and have been very trendy in recent years. These taps are similar to mixer taps and are often called mixer taps. However, they differ in that water flows from the same spout. The water flow is controlled by one lever. You can lift the lever up or move left and/or right to reach the desired temperature. This tap is very popular as it can be opened with one hand. It's easy to find the right temperature with minimal fuss.

3. Pillar taps

This is the most traditional type of bathroom tap. They are distinguished by having two separate hot and cold-water taps. Two spouts allow water to flow out and then only one basin is required. Although they are more convenient than monobloc and mixer taps, some people still prefer them.

4. Wall-mounted taps

These taps can be used to make baths or basins. They are also popular with those who want to hide water pipes behind walls. This makes it so that only the taps, spout and water supply are visible.

5. Deck-mounted taps

These taps are installed on the edge or side of the bath to make it easier for you. It can be as simple as hot, cold, and spout. In luxury baths, there may be an extra handheld shower or dial to switch between taps and showers.

6. Freestanding taps

Freestanding taps are often associated with roll-top or freestanding claw foot bathtubs. However, they do not connect to the bath. Instead, they are mounted on the floor and placed close to it. These taps are very popular in older properties that have large bathrooms.

7. Spout tap

A spout tap, which is often found in luxury bathtubs and whirlpools, is a water spout that does not have hot or cold taps. A separate control panel mounted on the wall or on another part of your bath will regulate the water flow. You can control the temperature and flow of the water using spout taps or controls.

Is every tap a standard size?

Basin and bath taps are different sizes, so make sure you measure the space where you plan to place them. You will need to make sure your taps fit securely into the basin or bath.

The design and shape of your tap are also important. A large tap might be too big to fit into a small basin. This could cause water to splash out from the sink when it is turned on. If the taps you are planning to install are close to the wall, make sure they will fit.

Take your time selecting bathroom taps, and if necessary, consult a professional bathroom fitter.

Tapron

To suit any bathroom, we offer a variety of bath filler valves (also known as taps). Tapron offers a variety of high-quality taps that will fit perfectly on top of your tub.

When you're looking for high-quality bath filler valves, the design and look of them are crucial factors in your final choice. You want the taps to match your bathroom decor. Our team strives to provide as many unique designs as possible so that you are able to find the right taps for you.